9.5' Wide PVC RV Rubber Roof Kit in Gray

*DISCLAIMER: Roofing ships in a box; It's important to unpack roofing material as soon as possible to avoid creasing

*Kits DO NOT come with installation instructions. If you require installation instructions, please consult a professional*

*30'-40' kits may have adhesive shipped in a 2 gallon pail based on availability

Maintaining and checking your RV roof is important to do every year to make sure you don't have any tears, holes, or cracks. This rubber roof kit provides you with everything you need for a quick and clean installation. And as a plus, once you've got the PVC roofing on, maintenance becomes little to none.

PVC rubber roof has been used by RV manufacturers for years and for good reason. This high quality roofing membrane is the strongest RV membrane, with the highest tensile strength and resistance to tears and punctures. It's also flexible, which means you can get an airtight seal around vents, corners and other objects and can install it on a sloped roof. Because of its weight, it also helps with insulation in your RV, saving you money in energy costs in the long run. Plus, PVC roofing is maintenance free. Unlike TPO or EPDM roofing, which will decay without treatment and care, PVC will stay strong and reliable without even conditioning it. With its antimicrobial properties, mold, mildew, and algae will be a thing of the past. Even animal fat and droppings, which will damage TPO and EPDM roofs, don't harm PVC. If these great properties don't impress you, then this PVC roofing material has a manufacturer 15-year non-prorated warranty. It also saves you money by having a greater reflective property, keeping your RV noticeably cooler. For the best RV roofing membrane, check out the PVC RV roofing material.

Please note that some kits have a different amount of components depending on the size. To remove the adhesive glue from the surrounding area, use water and a rag.

If one surface is porous (has small holes or spaces), such as plywood or fiberboard, it is recommended to wet laminate the membrane to the substrate. If both surfaces are non-porous, such as EPS or ISO, apply the adhesive to both surfaces 4-5 mils and allow to dry approximately 20-30 minutes, depending on conditions. Adhesive will turn from white to clear when it is dry. Apply membrane to roof deck and roll or broom down sheet to assure 100% contact area.

**Any wrinkles or surface inconsistencies are purely cosmetic and will not affect the structural effectiveness of the material**