Rockford Fosgate
Rockford Fosgate M5-1000X1 Marine Amplifier 1000W Class-D Mono Amp for Subwoofers
- SKU:
- RPM-2024


Description
Boost Your Music with an Easy to Install Amplifier from RecPro
Tired of your speakers not playing at quite the level you want them too? A simple upgrade may be just the thing to get your music coming out loud and clear. With a Rockford Fosgate amplifier from RecPro, you can boost your music’s sound and quality with one little easy addition.
This is a 1000W mono amplifier. It has an IPX6 water intrusion rating, making it great for marine installations. This features a preset that eliminates set-up when being connected to a Rockford Fosgate audio system. This amplifier uses patented C.L.E.A.N. technology (calibrated level eliminates audible noise) that helps match a source to the amp and optimize its output. And with balanced differential inputs, this amplifier is able to eliminate noise that can be picked up by the signal cables.
Upgrade your boat’s audio system with an amplifier from RecPro. You can get yours today from our website or reach out to our Customer Care Team with any questions.
Technical Data:
-
Rated Power (RMS continuous power):
- ≤1.0% THD+N
- 500 Watts x 1 @ 4Ω
- 750 Watts x 1 @ 2Ω
- 750 Watts x 1 @ 1Ω
- Dynamic power (PVC/PowerCube):
- 525 Watts x 1 @ 4Ω
- 900 Watts x 1 @ 2Ω
- 1000 Watts x 1 @ 1Ω
- Frequency response: 30Hz - 245Hz
- Input sensitivity: 150mVrms - 12Vrms
- Total harmonic distortion: <0.1% THD+N @ 1 Watt
- Operating voltage: 9-16V DC
- Signal input:
- Low-level: 2 RCA
- High-level: 4-Pin Molex
- Tone controls: Sub: 0-18dB @ 45Hz
- Crossover controls:
- Low-Pass: 50Hz - 250Hz @ 12dB/octave Butterworth
- Infrasonic: 30Hz @ 12dB/octave Butterworth
- Recommended fuse (not included): 70A MAXI, Littelfuse #0299070
- Average current draw (13.8V music):
- 4Ω: 23 A
- 2Ω: 53 A
- 1Ω: 64 A
- Max. current draw (13.8V sinewave):
- 4Ω: 46 A
- 2Ω: 75 A
- 1Ω: 88 A
Measurements
-
Dimensions: 8 3/8”W x 4 1/4 ”H x 1 3/4" D
Details:
-
Rockford Fosgate marine amplifier
- 1000W Mono amplifier
- RATS (Rockford Automated Testing System) proprietary quality and performance tested
- Preset removes the need to set-up and tune the amp when used with Rockford Fosgate UTV audio kits
- C.L.E.A.N. input/output clip detection and indicator LEDs
- Element Ready™ design with integrated harness and panel seals
- Constant power provides instantaneous delivery of output over varying impedance loads
- Balanced differential inputs eliminates noise picked up by signal cables
- Low impedance stability
- Focused mass heat sink allows critical aluminum material to be located around hottest internal devices
- Top mounted control panel with Element Ready™ smoked lens cover
- MEHSA 4 reduces MOSFET temps, lowers distortion, increases durability, and prolongs device life span
- Chassis isolation from mounting points to greatly reduce possible introduction of vehicle noise
- Discrete surface mount technology with 1% tight-tolerances for high efficiency and reduced cross-talk
- OEM and aftermarket radio integration inputs
- Class-BD technology provides 75-80% efficiency over traditional class A/B designs
- CTA-2006 compliant
- IPX6 water intrusion rating