RecPro®
30" RV Stabilizing Leveling Scissor Jack 5000 lbs Pair with Handle
- SKU:
- RP-1301
FREE SHIPPING
100% GUARANTEE Description
When you touch down in the campground after hours on the road, you have your checklist that you need to go through before you can call it a night. Hooking up to city water, plugging in to a power source, and stabilizing your RV should be at the top of your list. If you own a fifth-wheel or a "Toad" (tow behind/pop-up camper) then you need strong, high-quality, and easily-dialed-in support jacks that will stabilize and level out your unit in quick fashion. We know that this is a priority for you and your load-in list. Don't worry, we're here to help.
When you need some of the best stabilizers in the industry, you don't have to look any further than the line of 30" RV Single Stabilizing and Leveling Scissor Jacks with 5000 lb. Lift Capacity from RecPro. These durable workhorses are engineered to last through many uses over the life of your recreational vehicle. The internal components feature a strong thrust bearing and thread bolt that is easily turned with the steel, padded crank handle. These jacks are designed for easy ergonomic operation that will have you up and running, or down and relaxing, in no time**.
Our jacks are powder-coated with an attractive black finish so that they not only look good, but can withstand the rigor of the elements as you travel the country. The thrust bearing and threaded lift bolt only need maintenance once a year (applying non-caustic or rusting lubricant) to keep them operating at optimal condition.
The tops of our jacks have a solid-steel butterfly support to connect with the bottom of your unit. The wide butterfly plates are designed so that the greater surface area will help to stabilize the jack under your RV and help to avoid damage to the floor of your unit. The bottom of the unit has a bow-tie base that much like the butterfly plate on top that will help with stabilization, especially on uneven surfaces.
If weight capacity is your concern, you needn't worry with these stabilizing juggernauts. With one at each of the four corners of your RV, you'll have a combined capacity of 20,000 lbs. of lifting power! There's a lot of positives to adding these jacks to your RV. If you want some serious support while you're out there on the road, call our Customer Care Department and order your jacks today!
*INDUSTRY STANDARDS HIGHLY RECOMMEND THAT YOU HAVE A STABILIZATION IMPLEMENT ON EACH CORNER OF YOUR MOTORHOME, FIFTH-WHEEL, TOW-BEHIND, POP-UP, OR OTHER RECREATIONAL VEHICLE. HAVING ANY LESS THAN ONE SUPPORT ON EACH CORNER OF YOUR UNIT IS EXTREMELY DANGEROUS AND COULD LEAD TO CRITICAL INJURY OR DEATH. USING THE JACKS OUTSIDE OF MANUFACTURER'S INSTRUCTIONS VOIDS ALL WARRANTIES, AS WELL AS WAIVES ALL LIABILITY OF MANUFACTURER, RESELLER, AND ALL SUBSIDIARIES ATTACHED TO THE PRODUCT OR SALE OF THE PRODUCT.*
**ADHERE TO ALL RECOMMENDED SAFE LIFTING AND OPERATING PRACTICES WHEN RAISING OR LOWERING YOUR STABILIZING JACKS**
Features and Specifications:
- Weight capacity: 5,000 lbs
- Extended height: 30"
- Retracted height: 4"
- Crank handle not included with single unit (for 2 and 4 packs only)
- Bow-tie base provides added stabilization
- Rust-resistant powder coating
- Mounting plate bolt hole size is 3/8"
*Single RV scissor jack is only designed to hold up to 5,000 lbs. and not designed to stabilize an entire vehicle's weight.*
