KIB Electronics
RV KIB Tank Sensor Monitor Panel M25 with Wiring Harness Kit
- SKU:
- RP-M25B-KT
Description
Some people can search the internet for hours for the best price or the perfect part. At RecPro, we've done the searching for you. So, if you are done with looking and just want the whole kit and caboodle freeing up your time to focus on finishing the project, then we've got your back. This M25 Panel with Wiring Harness Kit gives you everything you need to set up and monitor up to 4 tanks, a battery, and control a water pump and heaters.
A tank monitor would be useless without probes. There has to be some way to look into the tank without actually looking at the tank. Constructed of stainless steel, vulcanized rubber, and rust-resistant hardware, these button-head sensors are built to last in the extreme environments of tank life. These vital little pieces are the cornerstone of the monitoring system. And in order for them to communicate with the panel, you need wire and wiring harnesses. Done and done.
Once you have all that strung together, you need an easy way to read the message the probes are sending. That is where the M25 monitor panel comes to play. This durable piece is available in black to blend with your interior. The easy to understand display lights up to indicate the approximate tank level when the corresponding button is pressed. A step above the M23, the M25 lets you check 2 gray water tanks instead of just one. With this handy monitor, you can also check your battery level and turn on the water pump.
This all-inclusive kit will provide years of visibility of your water system so you can get back to what you do best – relaxing in comfort.
Details:
- Overall Dimensions: 3 3/4"W x 3 3/4"H
- Bolt hole spacing: 3"W x 2"H (hole center to hole center)
- K101 "pigtail" wiring harness included
- Color: Black
- Made in USA
- Easy readout
- Monitor tank levels
- Monitor battery level
- Control for water pump
- Controls for electric and gas water heaters
Technical Data:
- 12V DC
The C, G, F, and L on the monitor stand for the charge of the battery (Charge, Good, Fair, and Low). Charge is set for 12.70-12.85V. Good is for 12.10-12.15V. Fair is for 11.60-11.65V. Low is for 6.00V and less. All values are in DC Volts plus/minus 5%.