RecPro®
Universal Fresh Water Fittings Installation kit with Sensors
- SKU:
- RP-FWKIT-KT


Description
A one-stop-shop; that's what RecPro is becoming in the RV industry. It's a place where your RV upgrading dreams become a reality. Our store combines the highest quality with industry-leading pricing and ease of purchase. We put your mind at ease when you shop with RecPro!
When it comes to tanks, RecPro has you covered. Whether it's fresh, black, or gray water, we've got something to fit your RV, travel trailer, concession stand, or small home. It's not just about having the tank that you need, though; it's also about the next step here at RecPro. We want to make sure that you have all the tools you need to finish the job. That's why, along with our wide variety of high-quality tanks, we offer top-of-the-line fittings kits for our freshwater tanks.
This comprehensive kit was designed to fit most tank builds in RVs and food trucks. A selection of self-sealing rubber grommets and water level sensors come with the package that will make installation a breeze. No chemicals, sealants, or other parts are required to make this kit work. Just drill the hole, place the grommet, insert your PVC pipe, and you're ready to go. It is just that simple! No need to go to the RV repair shop just to install your tanks. With a simple installation, you can get your tanks all fitted and ready to go in a snap, helping you get back on the road and back to your vacationing.
At RecPro, your selection from bookend to bookend is complete. We are your one-stop-shop for your water tank needs and want to help you find just what you need! Have any questions? Contact us online or call our friendly Customer Care team today!
Details:
Kit includes:
- (2) 1/2" grommets - requires 1 1/4" hole saw.
- (2) 3/4" grommets - requires 1 1/4" hole saw
- (2) 1" grommets - requires 1 3/4" hole saw
- (2) 1 1/2" grommets - requires 2 1/2" hole saw
- (1) 2" grommets - requires 3" hole saw
- (6) water level sensors requires 3/8" drill bit
- Color: Natural white
- Made in USA
-
The freshwater grommets expand (almost the same principle as a drywall anchor) when you push the piping through, locking it in place. The sensor, when you tighten the nut (after you attach the eyelet) the grommet collapses against itself expanding it and sealing the hole quite well.
-
Definitely not 1/2. I had to use a 1/2 hose with a coupling in it to seal correctly . The coupling expands the hose and prevents it from collapsing.
-
This kit is meant as a replacement or repair kit for freshwater tanks. It should work for your tank.
-
It uses PEX tubing and just pushes in and seals on a small lip of the grommet
-
I'm a plumber, I used 3/4",1",and 11/2 pvc slip x female thread,with the proper threaded barb fitting for hose connection.
-
The grommets are designed to pop into a hole in the tank and wen you push the size pvc pipe 1 inch pipe in the grommet for the 1"itexpand the rubber grommet tight enough to be water tight. It takes some force, easier with a proper lubricant. If you want an L fitting glue the pipe into the L and after dry push it into the grommet while twisting it to the proper angle. The pipe should be at least as long as the grommet is thick so you are pushing the inside of the grommet as tight as possible.